Restore your Holosun EPS Carry Red Dot Sight

Occasionally, you may want to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be achieved in just a few steps.

First ensuring your red dot sight is powered on.
Locate the small reinitialize button on the side of the unit.
Use a thin tool to activate the reset button for approximately three milliseconds.
Release the switch and your Holosun EPS Carry Red Dot sight will power cycle.
Your red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it back to standard configuration is a breeze. First, find the tiny button on the side of your optic. Then, sustain it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, ready for accurate shooting.

restore Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent unintended activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these straightforward steps:

Simultaneously press and hold the power button for approximately 5 seconds.
A message will flash, indicating that the reset is being performed.
Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. how to factory reset Holosun EPS Carry red dot You can re-attach the battery and confirm your sight's functionality. If you encounter any further difficulties, don't hesitate to seek help from Holosun's support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

First, Activate your Holosun EPS Carry by pressing the power button.
After that, press and hold both the mode button and the up/down adjustment button simultaneously.
During continue holding these buttons, activate the power button once.
You will show a confirmation prompt indicating that the reset process is initiated.
Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry through a Factory Original Settings

If your Holosun EPS Carry is acting up, a factory reset might be the fix. This will restore your sight to its factory settings, clearing any personalized configurations you've made. To accomplish this reset, adhere to these simple steps:

Initially, find the reset lever on your EPS Carry.
Next, press a fine object, like a toothpick, to depress the reset button.
While keep the reset button activated, power on your EPS Carry.
It will flash a message indicating that the reset is successful.

Once the reset is complete, your EPS Carry will be returned to its factory settings.